Many of us believe that because hardwood surfaces are a rather sensitive and dear material, we should look for the help of professionals to get them installed.

Therefore, it is comforting to know that with the right tools and the right kind hardwood, it is pretty much a do it yourself undertaking. And since prefinished hardwood flooring planks are already available in hardware stores and instructional manuals everywhere, then you really have nothing to fret over.

How does one install hardwood flooring? To start with, decide whether you would like to use oak, maple or cherry, or rustic ash. Oak is the most costly kind of hardwood material, but it is reputably the best and the sturdiest. If you’re operating under a specific budget, maple or rustic ash are also O.K and can last so long as oak with correct care and maintenance.

After that, prepare the following materials : the hardwood planks, a vapor barrier paper, a pry bar, a hammer, a speed drill and drill bits, a pneumatic flooring pack ( which is composed of a nail gun, staples, a mallet, a hose, and an air compressor ), a staple gun, a tape measure, a chalk line, and, of course, your instructional manual.

It’d be wise to observe the manual before you go about hammering away so you don’t waste time. A number of hardware stores currently have prepacked hardwood installation necessities so you can steer clear of the effort of attempting to find each piece. Of course, you shouldn’t forget your safety goggles and gloves, as all of the drilling and hammering could generate wood dust and can be damaging when breathed.

Prior to purchasing hardwood floor planks, measure the surface where you are going to install them. Order planks that are around 10 to fifteen inches bigger to permit room for mistakes. Expect that your initial attempt will be very testing, but after you get that first plank ready the rest should be much easier.

dispose of squeaks by firmly nailing the hardwood plank into the subfloor. When cutting, always make available extra space. When you are dealing with hardwood flooring, it’s better to go over and make the mandatory adjustments than be left with a space that may appear awkward to fill.

If you bought a prefinished hardwood floor, then the job is completed after you have installed the planks prepared. But if you bought wood in its purest form, you should also pre-equip yourself with sanding and finishing tools and make preparations for an additional challenging task ahead. To get the righ ones be sure to leaf through all the chief diy laminate flooring and DIY laminate floors manufacturers sites.

Comments are closed.